Hotel Solution

Hotels are places where people often reside on business trips, travels, and outings, and sometimes serve as temporary office spaces.In hotels, the lobby and guest rooms should meet office needs, and in order to provide higher quality services, catering, parking, etc. should be linked to information. So the comprehensive wiring system has become one of the infrastructure in hotels. The hotel's comprehensive wiring system can be centered around the guest room. In order to facilitate management, branching, merging, and testing in the guest room, a guest room distribution frame (wall mounted distribution frame) can be installed in the wardrobe of the guest room. After the distribution subsystem is terminated on the guest room distribution frame, it is laid using twisted pair cables into the 86 type bottom box of each information point based on the actual location of the information points in the guest room.To enhance the high-speed and unobstructed experience of passengers' check-in information, Tangpin suggests that the hotel's cabling should adopt a comprehensive cabling solution with a backbone of gigabit to desktop and 10 Gigabit multimode (OM3). To improve the energy-saving and environmental protection application effect of the computer room, Tangpin suggests using a micro module data center solution. Of course, if users have special needs, Tangpin has the most complete comprehensive cabling product line and data center infrastructure product line, which can provide customized end-to-end full link and data center infrastructure solutions.

Low insertion loss, Low PDL
Wide working wavelength: from 1260nm to 1650nm.
Excellent environmental and mechanical stability.
Fiber type: G657A or customer specified
Packaging: Steel pipe or ABS
Customization according to customer needs

Shielded, twisted pair, each pair wrapped in aluminum foil or coated with a layer of metal mesh, CM/LSZH cable, high-performance modular plugs. The conductor material is solid bare copper, the cable diameter is 23AWG, the insulation tensile strength is greater than 16MPa, and the sheath tensile strength is greater than 13.5MPa. The test can reach above 500HMZ.

Indoor optical cable, non-metallic reinforcement, tight sleeve optical fiber, flame retardant polyolefin sheathed optical cable, 850nm laser optimized 50um core diameter multimode fiber.
Center reinforcement: FRP or FRP with PE pad

2.0mm narrow key connectors at both ends
Various schemes can be customized: SC/FC/ST/LC/MPO
Low insertion loss, high return loss
3 types of pin end faces: PC/UPC/APC
Durability: 1000 times
Cable materials comply with OFNR OFNP standards
Complies with Rosh6 standards
Includes two dust covers

Rated input voltage: 250V AC
Cable specification: H05VV-F3G 1.5 mm²
Plug type: DIN4944016A plug
Maximum input current: 16A
Shell material: 1U aluminum alloy material.
Product size: L x W x H=482.6X44.4X44.4 mm (19 inches)
Socket system: new national standards for five holes, 16A national standards, etc
Maximum power: 4000W
Internal connection line method: Internal 1.5mm² RV flexible copper strip type.

A type of keystone jack module that is used in copper cabling and networking.
Provide exceptional performance required to support extremely high-speed applications, including 10-Gigabit Ethernet.
The module can be fully shielded.
Easy to install.

Cable management based on ISO/IEC 11801, TIA/EIA 568, YD/T926.3-2001 standards, and exceeding these standards.
Can be packaged in a 19 inch standard cabinet with various specifications, such as 12 ports and 24 ports.
Can connect 22, 24, and 26AWG (0.4 to 0.6mm) network cables.
Metal plate, corrosion-resistant steel.
A label box on the top of the panel.

Improve the efficiency of IT resource utilization in data centers, reduce functionality, and simplify the operation and maintenance of data centers.
Type: Rack Mount
Color: Customized
Material: SPCC cold rolled steel
Installation: Floor standing
Protection level: IP20/IP54/IP65
Application: Data Center
Cabinet standard: customized

Exquisite design and exquisite craftsmanship.
Equipped with casters or feet, it can be easily installed on walls or floors.
Load bearing: 60KG.
The top and bottom wiring channels may be closed.
Movable front door and side panel, easy to install and maintain.
Degreasing, acid washing, phosphorus, water washing, electrostatic powder coating, in accordance with ROHS standards.
Customizables.

Adopting modular design, it meets the installation requirements of various plug-in modules, suitable for interaction and termination between devices, and compatible with 19 inch equipment racks and cabinets. Durable and corrosion-resistant phosphor bronze DC ensures over 250 terminations. All ports have labels on the front end and a cable manager on the back, which effectively guides the cables to the end points.

Connector type: SC/FC/LC/ST
Material: cold rolled steel/stainless steel
Color: White/Black/Grey/Other
Size: Customizable according to customer needs.
Equipped with a stacked fusion tray, easy to open and easy to install and maintain the circuit. The box is equipped with reliable optical cables, tail cable introduction, fixation, and grounding devices.

Using PC bulletproof adhesive material. 86 international standard size design, 6mm ultra-thin appearance. Support the installation of multiple multimedia module frameworks, compatible with multi-functional integration such as RJ45 and fiber optic.